اما شما از چند عدد از این کدهای مخفی اطلاع دارید؟
خیلی از کاربران تلفن های همراه از این کدهای مخفی بی اطلاع هستند، کدهایی که دونستن اونها در بسیاری از موارد به کمک شما میان
در
این پست قصد داریم تا کد های مخفی تمام انواع مدل های تلفن همراه رو با
کاربرد اون ها برای شما کاربران عزیز ارائه بدیم تا با اون ها و نحوه
استفاده از اون ها بیشتر آشنا بشید
*01763*8371# (*01763*VER0#) - Firmware Version. === BenQ-Siemens Secret Codes Software version: *12022243121 is code for old Siemens model, like C35, M35 , S35 etc. === LG Secret Codes LG all models test mode: Type 2945#*# on the main screen. === Software version: *#9999# === IMEI number: * # 0 6 # === Samsung T100 Specific Codes Battery status (capacity, voltage, temperature): * # 8 9 9 9 * 2 2 8 # === Samsung SGH-2100/600 *#06# Displays IMEI === IMEI number: === Sony Ericsson Secret Menu: -> * <- <- * <- * === On the main screen type === IMEI number: * # 0 6 # === More of nokia On the main screen type *#06# for checking the IMEI (International Mobile Equipment Identity). *#7780# reset to factory settings. *#67705646# This will clear the LCD display(operator logo). *#0000# To view software version. *#2820# Bluetooth device address. *#746025625# Sim clock allowed status. *#62209526# - Display the MAC address of
the WLAN adapter. This is available only in the newer devices that
supports WLAN like N80 #pw+1234567890+1# Shows if sim have restrictions. *#92702689# - takes you to a secret menu where you may find some of the information below: 1. Displays Serial Number. 2. Displays the Month and Year of Manufacture 3. Displays (if there) the date where the phone was purchased (MMYY) 4. Displays the date of the last repair - if found (0000) 5. Shows life timer of phone (time passes since last start) *#3370# - Enhanced Full Rate Codec (EFR)
activation. Increase signal strength, better signal reception. It also
help if u want to use GPRS and the service is not responding or too
slow. Phone battery will drain faster though. *#3370* - (EFR) deactivation. Phone will
automatically restart. Increase battery life by 30% because phone
receives less signal from network. *#4720# - Half Rate Codec activation. *#4720* - Half Rate Codec deactivation. The phone will automatically restart If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538# Press *#3925538# to delete the contents and code of wallet. *#7328748263373738# resets security code. Default security code is 12345 Unlock service provider: Insert sim, turn
phone on and press vol up(arrow keys) for 3 seconds, should say pin
code. Press C,then press * message should flash, press * again and
04*pin*pin*pin# Change closed caller group (settings
>security settings>user groups) to 00000 and ure phone will sound
the message tone when you are near a radar speed trap. Setting it to
500 will cause your phone 2 set off security alarms at shop exits, gr8
for practical jokes! (works with some of the Nokia phones.) Press and hold "0″ on the main screen to open wap browser. === IMEI number === secret iPhone codes *#06# Displays your IMEI. No need to tap
Call.IMEI is the unique identifier for your cell phone hardware.
Together with your SIM information it identifies you to the provider
network. *777# and tap Call. Account balance for prepaid iPhone. *225# and tap Call. Bill Balance. (Postpaid only) *646# and tap Call. Check minutes. (Postpaid only)These three are pretty self explanatory. *#21# and tap Call. Setting interrogation
for call forwards.Discover the settings for your call forwarding.
You'll see whether you have voice, data, fax, sms, sync, async, packet
access, and pad access call forwarding enabled or disabled. *#30# and tap Call. Calling line
presentation check.This displays whether you have enabled or disabled
the presentation of the calling line, presumably the number of the
party placing the call. *#76# and tap Call. Check whether the
connected line presentation is enabled or not.State whether the
connected line presentation is enabled or disabled. Presumably similar
to the calling line presentation. *#43# and tap Call. Determine if call
waiting is enabled.Displays call waiting status for voice, data, fax,
sms, sync data, async data, packet access and pad access. Each item is
either enabled or disabled. *#61# and tap Call. Check the number for
unanswered calls.Show the number for voice call forwarding when a call
is unanswered. Also show the options for data, fax, sms, sync, async,
packet access and pad access. *#62# and tap Call. Check the number for
call forwarding if no service is available.Just like the previous,
except for no-service rather than no-answer situations. *#67# and tap Call. Check the number for call forwarding when the iPhone is busy.And again, but for when the iPhone is busy. *#33# and tap Call. Check for call control
bars.Check all the usual suspects (voice, data, fax, sms, etc) to see
whether barring is enabled or disabled for outgoing. === IMEI number: * # 0 6 # === IMEI number: * # 0 6 # === IMEI number: * # 0 6 # === IMEI number: * # 0 6 # === Sagem IMEI number: * # 0 6 #
هیچ وقت دیر نیست
http://www.irtools4u.com/
Sharp Secret Codes
*01763*3641# (*01763*ENG1#) - Enable Engineer Mode hold power key to leave then disable.
*01763*3640# (*01763*ENG0#) - Disable Engineer Mode.
*01763*8781# (*01763*TST1#) - Test #1 (test early wdt looping to dump, need to remove battery from phone)
*01763*8782# (*01763*TST2#) - Test #2 (test irq dis looping to switch, resets itself
*#06#
to see more info, press softkey again
English menu:
*#0001#
Deutsch menu:
*#0049#
That code not working with BenQ-Siemens model.
Also
you can change language in Siemens and BenQ-Siemens to any language( if
you have that language support in mobile phone, of course) if you put
between *# and # your country code with zeros before country code
(zeros and counry code must have together four digits).
When you use code for language that not support language in mobile phones turn to automatic.
Examples:
*#0033# french
*#0385# croatian
*#0030# greek
*#0039# italien etc.
2945*#01*# Secret menu for LG
IMEI (ALL): *#06#
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
IMEI number: *#06#
Serial number: *#0001#
Battery status- Memory capacity : *#9998*246#
Debug screen: *#9998*324# - *#8999*324#
LCD kontrast: *#9998*523#
Software version: * # 0 0 0 0 #
Lub * # 9 9 9 9 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4 1234567890 -
MasterCode which is generated from IMEI *#92702689# [*#war0anty#] Warranty code.
Program status: * # 8 9 9 9 * 2 4 6 #
Change Alarm Buzzer Frequency: * # 8 9 9 9 * 2 8 9 #
Debug screens: * # 8 9 9 9 * 3 2 4 #
Watchdog: * # 8 9 9 9 * 3 6 4 #
EEPROM Error Stack: * # 8 9 9 9 * 3 7 7 #
Trace Watchdog: * # 8 9 9 9 * 4 2 7 #
Change LCD contrast: * # 8 9 9 9 * 5 2 3 #
Jig detect: * # 8 9 9 9 * 5 4 4 #
Memory status: * # 8 9 9 9 * 6 3 6 #
SIM File Size: * # 8 9 9 9 * 7 4 6 #
SIM Service Table: * # 8 9 9 9 * 7 7 8 #
RTK (Run Time Kernel) errors: * # 8 9 9 9 * 7 8 5 #
Run, Last UP, Last DOWN: * # 8 9 9 9 * 7 8 6 #
Software Version: * # 8 9 9 9 * 8 3 7 #
Test Vibrator: * # 8 9 9 9 * 8 4 2 #
Vocoder Reg: * # 8 9 9 9 * 8 6 2 #
Diag: * # 8 9 9 9 * 8 7 2 #
Reset On Fatal Error: * # 8 9 9 9 * 9 4 7 #
Last/Chk: * # 8 9 9 9 * 9 9 9 #9 9 * 9 9 9 #
*#9999# Software version
*#0324# Technical menu
*#0523# Lets you adjust the screen contrast
*#0228# Battery status (capacity, voltage, temperature
Motorola Secret Codes
*#06#
Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.
Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] [...]
(-> means press joystick, arrow keys or jogdial to the right and <- means left.)
You'll
see phone model, software info, IMEI, configuration info, sim lock
status, REAL time clock, total call time and text labels.
You can also test your phones services and hardware from this [...]
IMEI number: * # 0 6 #
Software version: > * < < * < *
Default Language: < 0 0 0 0 >
Enter to phone menu without SimCard - after Wrong PIN: press NO: * * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK: < * * <
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN [...]
Software version: * # 0 0 0 0 #
Lub * # 9 9 9 9 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4 1234567890 -
MasterCode which is generated from IMEI *#92702689# [*#war0anty#] Warranty code
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
*#06#
Software Version
*#0000#
Alcatel
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *
Default Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 # #
Software version: * # 9 9 9 9 #
SIM card serial number: * # 9 9 9 4 #
Information about battery status: * # 9 9 9 0 #
Selftest (only Dancall HP2731): * # 9 9 9 7 #
Show version configuration: * # 9 9 9 8 #
Net Monitor: * # 9 9 9 3 #
Simlock info: * # 8 3 7 7 #
Security code: * # 1 2 3 4 # (Fizz) or * # 7 4 8 9 #
Service Menu access: MENU 5 1 1 #